If you are a frequent smoker then we assume that you should have heard about the DynaVap product line. The DynaVap vaporizers have made the vaporizing technique simple, traditional, and as manual as it can get.
Experienced smokers are in love with the involvement in the whole process where the chamber is heated directly using the external source of heating.
The body is predominantly made up of metallic material and the chamber is present on the one extreme. These devices are developed to be used daily for an on-a-go vaping routine.
Thanks to its compact size, it fits perfectly in the palm. However, small size does not mean that these devices are useless or have fewer features than other vaporizers in the market.
The airflow is pretty much flawless where you would get an uninterrupted stream of vapors. The hardest thing to get along with is the heating process. As the process is external and entirely manual, you will face some difficulty in determining how long to heat the device or what is the better way to cook it evenly.
While all these questions stand their ground, let us discuss some of the most popular DynaVap devices and enlighten you regarding the frequently faced problems. Read through the article and get mesmerized by the ease and uniqueness of the DynaVap fam.
- DynaVap Omni Review
- DynaVap Vong Dark Wood Review
- DynaVap Omni XL Titanium Review
- The DynaVap “M” Review
- DynaVap DynaTec Induction Heater Orion V2 Review
- DynaVap Apollo 2 Rover Induction Heater Review
- How to heat a DynaVap
- How to clean Dynavap?
- Is a Dynavap worth it?
- Is Dynavap conduction or convection?
- Is Dynavap a vaporizer?
- Is Dynavap healthy?
- Does Dynavap smell?
- Does the Dynavap get you high?
- Best way to heat Dynavap?
- How to microdose with Dynavap?
- How to grind for Dynavap?
- Why does my Dynavap click twice?
- When to clean Dynavap?
- When to replace Dynavap cap?
- How long does Dynavap take to cool down?
- How long does Dynavap last?
- How does the Dynavap click work?
- Can you use Dynavap with a lighter?
- Should You Buy DynaVap?
DynaVap Omni Review
DynaVap Omni 2021 is a highly compact vaporizer with a durable and shiny surface. The titanium body serves as the best insulating metallic alloy that reduces the risk of injuries.
The design is as slim as a pencil or a mini flute. It runs on an unexpectedly advanced heating system that runs on both conduction and convection mode. The airflow is adjustable alongside an entirely manual heating technique.
The dry herbs are directly exposed to the torch-based cooking process where you have to put the tip of Omni 2021 on the flame directly.
There is no prominent way of knowing the temperature inside the chamber but the company has integrated a magnetic clicking mechanism. Once the temperature is reached, you will hear the cap clicking.
However, the device is vulnerable to overcooking so you should take care of that. The device is overall compact but the length is longer than the other devices in the DynaVap product line.
This means that the vapors will cool down before they reach your mouth. There is no battery installed inside the device so now you can travel wherever you want without worrying about battery depletion.
The Omni 2021 is one of those devices that will look great in your hands especially due to the shiny coating and compact size. The method of usage is simple and the airflow adjustments make is everyone’s favorite. It is not that expensive either.
DynaVap Vong Dark Wood Review
An extremely stylish vaporizer that will definitely impress you with its bizarre yet eye-catching design. The body is pretty much made up of titanium metal with a wooden centerpiece to make the heating process better.
It is now designed to fit perfectly in your hand, especially the curves shaped along the wooden part allowing you to grip the device.
The bowl is easily accessible. You can remove the cap with just a gentle twist and pull. When closed, the cap clicks to tell that it has fitted. Apart from all this, the airflow is impeccable where you have complete control over it.
Once you have adjusted the airflow at your favorite settings, let the herbs cook, after a click, you will get to know that the herbs are cooked.
The chamber is fully contoured with a grinder integrated to help churn the herbs down while cooking. Furthermore, the bowl is adjustable in capacity so now you can adjust the width according to your load. The heating process is completely manual to allow you the traditional control.
Dark Wood 2021 is a combination of metallic shine and a classic woody feel. The airports on the wooden portion look as classy as a brown cigar or wooden flute. It has a short heating time and the design is more advanced where the cuts are shaped for better grip.
DynaVap Omni XL Titanium Review
As the name suggests, the DynaVap Omni XL Titanium is closely related to the Omni 2021. It has a stainless steel chamber that will last longer than any other metal chamber. The body, however, is made up of titanium metal which is light and insulates the device properly.
The device is also accompanied by an XL condenser that can be extended and retracted by twisting the cap. This simple feature allows you to adjust the airflow of your Omni XL Titanium. The body takes a long time to cool the vapors before they reach your mouth. Apart from this, the heating process is as simple as it can get.
The same external source is required to heat the chamber directly. Once the vapors are prepared, you will hear a magnetic click. The self-cooked vapors along with perfectly adjusted airflow will produce the best vapors you will ever get.
There is no battery integrated inside the device because the heating is done using an external source. This feature makes this device portable and easy to use while traveling to far-off places.
Omni XL Titanium is a larger version of Omni 2021. The condenser makes it easier to handle the airflow whereas the cleaning is also very simple. The build is durable and as shiny as the Omni 2021. It will last a lifetime.
The DynaVap “M” Review
Running on the operating procedure as simple as the name, the “M” Vaporizer produced by the DynaVap company is one of the highest quality devices that complement both the herbal and concentrate smoking (the DynaVap coil adapter is sold separately).
The heating process is as simple as the other products that we have discussed earlier but it would take some understanding initially to get along with.
The chamber is made up of the same stainless steel while the body is pure titanium to insulate the device. The titanium metal is light and durable for portable usage, however, the battery feature is a winner too.
There is no battery involved in the functioning as the heating source is external so you can pack it inside your bag for long traveling trips. Adjustment of airflow is easy because the airports are simple to deflect.
The chamber also has a size adjustment for microdosing compatibility and also has a grinder integrated inside to manage the larger chunks as well. This device is more even in cooking the herbs because the chamber is designed to dissipate the heat evenly.
A great companion for all those who prefer vaping at lower temperatures. The M is simple to handle and control as the material is durable and the heating process is as simple as any other DynaVap device. Moreover, the battery-less functionality makes it portable like no other device.
DynaVap DynaTec Induction Heater Orion V2 Review
As we all know, the DynaVap devices do not have an inbuilt heating system to prepare the vapors. The DynaVap vaporizers depend entirely on the external heating source to produce dense, aromatic, and tasty clouds of vapors.
For this very reason, the company has developed an induction heater to save you from the hustle of finding an electronic device that complements your DynaVap device.
Orion V2 is an effective heat source that prepares the vapor batch in 4 to 6 seconds on average. The heat is evenly transferred through the chamber cap to the herbs.
The caps of all DynaVap devices are standard size to fit perfectly inside the heating inductor. The Orion V2 turns itself off automatically after 10 seconds of inactivity.
This feature saves a lot of battery life to use while traveling. Other than this, the charging is fast as it complements the USB type C charger while the size is compact enough to fit perfectly inside the pocket. The heater detects DynaVap caps automatically and once the temperature is reached, the device clicks to let you know.
DynaVap Apollo 2 Rover Induction Heater Review
The induction heaters are one of the most reliable sources of heating the DynaVap vaporizer. The Apollo 2 Rover Induction Heater is one of those devices that run electronically and operates simply by inserting the DynaVap vaporizer inside the heating port.
It detects the DynaVap device automatically and starts heating immediately. The vapors are prepared in 8 to 10 seconds on average. The heat dissipated is even and consistent throughout the whole process.
Apollo 2 fits perfectly inside your pocket and has a 1550 mAh battery. This battery is sufficient enough to provide 150 heating cycles without a doubt. It also has an automatic shutoff feature where the device turns off after 15 seconds.
How to heat a DynaVap
The heating process is very different from other traditional vaporizers. The device does not come with an in-built heating system. Instead, the chamber can be heated externally using the heating source of your choice. You need to first fill the chamber with the herb of your choice. After that, close the lid and start cooking the herbs.
The external heating source can be a butane torch, a magnetic heat inductor, or a traditional cigarette lighter. You should place the tip of your device directly on the heat source and wait until you hear clicks.
The butane torch is the best heating source that provides you with better control over the whole process. Moreover, it is recommended to heat the tip of the device instead of the middle portion of the chamber. It might take longer but the flavor and smell will be perfect.
Cleaning a DynaVap vaporizer can be tricky. At the start, you should take the cap and tip off the device. Once that is done, push a cotton bud through the body to get the condenser out. Make sure that you remove the screen before soaking the parts inside the iso solution.
Do not put the mouthpiece or the tip inside the iso for safety precautions. Instead, clean it by hand. Once the dirt softens, use a cotton bud to scrap the dirt off the device.
Let the part dry and fit them back to smoke again. Apart from the tip, other components can be soaked in iso because there is no electric part involved.
Those users who prefer easy production of vapors should buy the DynaVap vaporizers. It is as simple as rolling a cigarette or smoking a cigar.
The amount of control on offer is unprecedented. It also has a great airflow adjustment method enabling you to receive an uninterrupted supply of vapors.
The build is durable and compact. However, the main problem is the absence of advanced features such as digital control and the vulnerability to overcooking. All in all, it is more than a worthy device for those who know the heating process.
Dynavap uses the simplest heating process. The chamber is located at one extreme of the device where the metallic walls surround it to soak heat when subjected to an external flame. You can use any external heating source to cook herbs.
After subjecting the chamber to direct flame, the metallic tip and walls conduct the heat and dissipate it to the load. The process is entirely conduction based so you have to make sure that the load does not get burnt.
Is that even a question? DynaVap is one of the simplest and easy-to-use vaping devices ever made. The uniqueness of the heating process is the main reason why people think of it as a different product.
We do believe that the heating method is unorthodox, however, the herbs (or flowers) produce aromatic and strong sets of vapors. These vapors are then carried through the air blown by the DynaVap. All these steps are similar to what traditional vaporizers do apart from the external heating method.
DynaVap devices are as healthy as any other vaporizers in the market. The build is simple but that does not mean that the company has compromised on your health. The body is made up of medically graded titanium which ensures that your health is not compromised.
Metallic smell has been a major drawback while using the conduction vaporizers. Since DynaVap has a metallic chamber and the heat procedure is entirely conduction, it is vulnerable to metallic smell as well. Experienced smokers rarely face this problem because they know how to cook the herbs properly.
First of all, use a single or double flame torch to keep the temperature accurate. Triple flame is too strong to control and manage. Next, heat the tip to make the process a bit indirect.
Heating the middle portion of the chamber is the most direct way of doing things. Last but not the least, rotate the tip continuously to evenly cook the herbs. All these tips are effective enough to eliminate the risk of metallic smell.
Getting high is an extremely subjective thing. Mostly, the pleasure is dependent on the kind of material that you are using. Make sure that the herb or flower is of good quality.
Do not grind the flowers before loading them into the chamber as it can impair the taste. After all, this, follow the heating steps that we have discussed earlier to produce the best quality vapors. These minor changes will definitely get you high in no time. The convenience is similar to that of rolling a cigarette.
The best way to heat DynaVap Vaporizers is direct heat via a consistent external source. There are numerous methods to apply heat to the chamber but the most effective one so far is the Butane torch.
It makes sure that the exterior of your DynaVap device is not blackened or damaged. Moreover, the flow of heat is consistent. The only thing that you need to do is to keep rotating the device while it is being heated.
Another important thing to consider is that you should heat the tip rather than the sides. This process is a little slow but the aromatic essence is maintained.
When choosing the best butane torch, you should know the type of your usage. Butane torches are usually available in three different kinds. A single flame is the slowest but the most accurate kind.
A double flame torch is a bit quicker to heat the chamber, however, the temperature control is not as accurate. The triple flame torch is the strongest butane torch, however, it requires utmost diligence.
For micro-dosing, you can adjust the chamber width to 0.02g of herbs. This is lighter than smoking a cigarette. However, if you smoke at a high temperature while using such a small amount of herbs, they will get consumed early. Heat the tip only to make sure that the temperature is low enough to dose for a long time.
As the official website states, the DynaVap devices require no prior grinding before filling the chamber. The device has its own internal grinder that churns the flowers into small pieces.
However, there is one big difference. Pre-ground herbs tend to have a light taste but the wastage is lesser as compared to ungrounded material. Unground herbs perish quickly.
The DynaVap Vaporizers have audible controls. When the required temperature is reached, the device will produce clicks to let you know that the vapors are ready to smoke.
The clicks might mean that the device is redundant or idle but whatever the case may be, you should remove it from the heat source.
The absence of digital controls or an LED screen is a major drawback, however, the audible controls are a simple yet effective way to know what is going on inside the chamber. Leaving the device on the heat source for a long will damage the body.
You should clean your DynaVap once in a few days. The frequency of cleaning is an entirely subjective matter. A sound indicator to clean the device is the impairment in taste. Dirt and blockages can deteriorate the taste or limit the flow. Once this happens, clean the device.
While the titanium body is durable and lasts a lifetime, the cap is magnetic and vulnerable to wear and tear. The magnetic cap is made of stainless steel so it will last a few years depending on how well you handle it. Make sure that you do not heat the cap after the clicks as the temperature crosses the resistance limit.
It only takes a few seconds for DynaVap Vaporizers to cool down. To keep things accurate, DynaVap corporation has developed the clicking mechanism where the device clicks upon heating as well as cooling. These clicks are audible so you should wait for them before loading the chamber again.
The DynaVap vaporizers and induction heaters are durable enough to last a long time. Since the vaporizers do not have a battery or other electronic components, it makes the handling simple and the performance does not diminish much over the lifetime.
When you start heating your DynaVap device, the chamber starts dissipating the heat to herbs. Once the temperature is reached, the magnetic clicker clicks to let you know. Upon cooling, the device clicks again.
The external source to heat the cap of DynaVap can be anything. The most common kind in the butane torches that we have discussed above. At times, you might have other things to heat the chamber.
Cigarette lighters are the best example of such sources. These lighters are low in intensity and power so it would take a long to complete the whole process. Moreover, the lighters leave prints on the body.